Ricoh IM C300F User Guide - Page 169
Adding Paper and Toner, Loading Paper into the Paper Tray
View all Ricoh IM C300F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
8. Adding Paper and Toner Loading Paper into the Paper Tray The method of loading paper varies for each tray type. • When replacing paper or removing jammed paper, make sure not to trap or injure your fingers. • If the first layer paper tray is installed, do not pull out more than one tray at a time. Pressing down forcefully on the machine's upper surface might cause the machine topple over, possibly resulting in injury. Tray 1 Bypass Tray Tray 2 Tray 3 Tray 4 D0C9IA0905 • Before loading paper into a tray, check the paper size and type that can be loaded in the tray. page 182 "Recommended Paper Sizes and Types" • To load thick paper or other special paper, specify the paper type or thickness in [Tray/Paper Settings] of [Settings]. See "Tray/Paper Settings", User Guide (Full Version). • Check the paper setting before printing. If the paper differs from the paper setting, a mismatch error will occur when you print. • Straighten curled or warped paper before loading. • If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side fences may slip out of place. • When loading a low number of sheets, be sure not to squeeze the side fences in too tightly. If the side fences are squeezed too tightly against the paper, the edges may crease or the paper may misfeed. 167