Ricoh IM C300F User Guide - Page 241
See Stapling Printed s, User Guide Full
View all Ricoh IM C300F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
When a Message Appears While Using the Printer Function Message Cause Solution and reference "Sending data failed." Transmission of data from the printer driver was canceled. Check that the computer is operating normally. "Staple error occurred. The job has been cancelled." The number of sheets that can be stapled was exceeded, and printing was canceled. Check the number of sheets that can be stabled on the finisher in use. page 273 "List of Specifications" "Staple has been cancelled." The Staple function was canceled because too many printed sheets were specified to be stapled. Check the specification of the finisher in use, and specify the setting accordingly. • Number of sheets that can be stapled together page 273 "List of Specifications" • Staple position that can be specified on different paper orientation and print data orientation See "Stapling Printed Pages", User Guide (Full Version). A malfunction occurred temporarily on the machine. Turn off the power of the machine, wait for 10 seconds or more after confirming that the main power indicator is turned off, and then turn on the power. page 9 "Turning On and Off the Power" "The job was cancelled because the specified settings are not applicable for Booklet." A condition in which binding cannot be performed was specified, and printing was canceled. Check the binding condition. "The print job has been cancelled because capture file(s) could not be stored: Exceeded max. memory." The amount of available space on the hard disk became low while saving the capture data. • Reduce the size of the document to send. • Erase documents that are no longer needed. See "Deleting Documents Stored in the Machine", User Guide (Full Version). See "Erasing Documents from Document Server", User Guide (Full Version). 239