Ricoh IM C300F User Guide - Page 206
When the Machine Cannot Be Operated, When the Machine Does Not Respond Correctly to an Operation
View all Ricoh IM C300F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
9. Troubleshooting When the Machine Cannot Be Operated • If a message is displayed on the screen, check the message. • See "When a messages Is Displayed and the Machine Cannot Be Operated", User Guide (Full Version). • When confirming or changing the settings in [Settings], press [Home] ( ) after completing the operation to close [Settings]. When the Machine Does Not Respond Correctly to an Operation on the Control Panel Condition Cause Solution and reference The screen of the control The machine is in the sleep Touch the screen. panel is not lit. mode. Nothing is displayed when you touch the screen. The power of the machine is turned off. Check that the main power indicator is not lit, and then turn on the main power of the machine. page 9 "Turning On and Off the Power" The power of the machine does not come on. The power cable is unplugged from the wall outlet. Connect the ground wire, and plug the power cable into the wall outlet. See "Installation Requirements After Moving the Machine", User Guide (Full Version). The machine is connected to an extension cord. You cannot use an extension cord. After checking that the screen is not lit when you touch it and the main power indicator is unlit, remove the extension cord and plug the power cable directly into the wall outlet. There may be a problem with the wall outlet. After checking that the screen is not lit when you touch it and the main power indicator is unlit, plug the power cord into a confirmed operating wall outlet. 204