Ricoh Priport HQ7000 Printer Reference - Page 46
When connecting with the network, When connecting with a parallel cable
![]() |
View all Ricoh Priport HQ7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Preparing to Print ❖ When connecting with the network • The printer must be set to bidirectional transmission. • SmartDeviceMonitor for Client included on the CD-ROM must be installed. One of the following conditions must also be satisfied as well as the two requirements mentioned above: 2 • The port for SmartDeviceMonitor and TCP/IP must be used. • The standard TCP/IP port is used without changing the port name (Win- dows 2000/XP, Windows Server 2003). • The IP address specified in the Microsoft TCP/IP Print is used (Windows NT 4.0). • The IP address is included in port name, if using IPP protocol. Note ❒ Under Windows 95/98/Me, [Enable bi-directional support for this printer] must be selected in [Spool Settings] on the [Details] tab in RPCS printer driver. ❒ Under Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, [Enable bidirectional support] must be selected, and [Enable printer pooling] must not be selected on the [Ports] tab in RPCS printer driver. ❖ When connecting with a parallel cable • The computer must support bidirectional transmission. • The printer must be set to bidirectional transmission. • The printer parallel port and computer parallel port are connected using a parallel interface cable that supports bidirectional transmission. Note ❒ Under Windows 95/98/Me, [Enable bi-directional support for this printer] must be selected in [Spool Settings] on the [Details] tab in RPCS printer driver. ❒ Under Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, [Enable bidirectional support] must be selected, and [Enable printer pooling] must not be selected on the [Ports] tab in RPCS printer driver. 40
![](/manual_guide/products/ricoh-priport-hq7000-printer-reference-507f0b9/46.png)