Samsung WMN5090 Installation Instructions - Page 13
communications
View all Samsung WMN5090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
4 - 6 Connect the cables, as directed below. 0 Connect the communications cable from the EX-LINK on the Wall mount to the EX-LINK (Service) on the back of the TV. C) Connect the adapter and the power cord for the wall mount. 0 Connect the power cord of your TV to a power outlet. ® Connect other peripheral devices to your TV. 0 Turn on your TV. Adapter connector \\ II4 C )SEr UP ®)0012V 0 0 0 0 moo )EX-UXE = 0 0 LJ Communications cable connector EX-LINK (Service) connector GIC)7 * Make sure to recheck that the adapter and cables are connected to their correct connecting locations. 4 - Tie the adapter cable and communications cable using the provided wire holder, as shown in the figure below, so that they do not come undone while you are rotating or operating the TV. 0 •^N 0 a tt To prevent the cables from interfering with your TV when rotating it, pull the ang e adjustment device as far forward as possible after inserting the cables and inserting the wire holder through the matching hole on the angle adjustment device and let it bind the cables as shown in the figure below. Check the operation two or three times to check if there are any problems. Hgr. * Check whether the cables are too taut when operating your wall mount. 8 4 - Move the TV as close as possible to the wall, as shown in the figure below.