Sharp AR-337 AR-287 , AR-337 , AR-407 Operation Manual - Page 115

FINISHER (AR-FN1N) The copier has two different finisher modes: one sorts copies into sets matching the sequence of the originals and the second groups copies by original. When the optional finisher (AR-FN1N) is installed, the copier can automatically staple the sorted copies. Each collated set of copies or group of copies can be stacked offset from the previous set. PART NAMES Top tray Top cover Finisher release lever Second tray (not used in the copy mode) Paper feed area cover Paper transport area cover OPTIONAL EQUIPMENT 7 Finisher (AR-FN1N) CHAPTER Offset tray When copying onto size 11" x 17" paper, lower the metal support located at the tip of the offset tray. Stapler unit q The top tray and second tray are each furnished with an extendable component, which is to be used when copying onto size 11" x 17" paper. Specifications Tray capacity Top tray: Second tray: Offset tray: 500 sheets 500 sheets 1,500 sheets (8-1/2" x 11") 750 sheets (larger than 8-1/2" x 11") Paper size Top tray: Second tray: Offset tray: 5-1/2" x 8-1/2" to 11" x 17" 5-1/2" x 8-1/2" to 11" x 17" 8-1/2" x 11" to 11" x 17" Paper weight Top tray: 14 lbs. to 34 lbs. (when face up) 17 lbs. to 28 lbs. (when face down) Second tray: 17 lbs. to 28 lbs. Offset tray: 17 lbs. to 34 lbs. (when face up) 17 lbs. to 28 lbs. (when face down) For paper weighing more than 28 lbs., 8-1/2" x 11" is the maximum size. Offset 1.2 inch (30 mm) Paper size for stapling 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17" Stapling capacity 50 sheets (20 lbs.) (25 sheets for 8-1/2" x 14" and 11" x 17" paper) Power supply Drawn from the copier Weight Approx. 111 lbs. (50 kg) Dimensions 23-15/64"(W) x 22-1/16"(D) x 39-19/64"(H) (590 mm (W) x 560 mm (D) x 998 mm (H)) Specifications are subject to change for improvement without notice. 7-3