Sharp AR-337 AR-287 , AR-337 , AR-407 Operation Manual - Page 41
Cancel
View all Sharp AR-337 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
ERASE 3 CHAPTER SPECIAL FUNCTIONS Erase READY TO COPY. ERASE EDGE ERASE CENTER ERASE EDGE+CENTER ERASE ERASE EDGE ERASE CENTER ERASE EDGE+CENTER ERASE OK 4 Select the desired erase mode. q Select "EDGE ERASE", "CENTER ERASE" or "EDGE+CENTER CANCEL OK ERASE" on the touch panel. The selected erase mode will be highlighted. 1 (0~1) inch CANCEL OK OK 1/2 (0~1) inch 5 Adjust the amount of edge erase and/or center erase if needed. q The amount can be adjusted between 0" and 1" in 1/8" increments. CANCEL OK OK 1 (0~1) inch INTERRUPT CLEAR C CLEAR ALL CA START 6 Press the upper "OK" key on the touch panel. 7 Make all other desired copier selections and press the START key. q If the document feeder is used, scanning of originals and copying will start. q If the document glass is used in the SORT mode, proceed to the next step. PLACE NEXT ORIGINAL. PRESS [START]. WHEN FINISHED, PRESS [READ-END]. READ-END AUTO EXPOSURE AUTO 81/2 11 PAPER SELECT 100% COPY RATIO 8 Replace the finished original with the next original after the START key indicator lights up, and then press the START key. Repeat this step until all originals have been scanned. Then, press the "READ-END" key on the touch panel. q Copying will start at this time. q Up to 120 sheets of 8-1/2" x 11" originals or up to 60 sheets of originals larger than 8-1/2" x 11" can be scanned. q To cancel the ERASE function, select the ERASE function again and press the "CANCEL" key. 3-7