Sharp AR-337 AR-287 , AR-337 , AR-407 Operation Manual - Page 86
flow of toner into the toner hopper.
View all Sharp AR-337 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
ADDING TONER 4 CHAPTER SUPPLIES Adding toner Sealing tape 4-6 4 Place the new toner cartridge with the tabs in the notches as shown. 5 Slide the toner cartridge along the guides over the toner hopper. 6 Hold the toner cartridge with one hand while pulling on the sealing tape to remove it. 7 Tap on the top of the toner cartridge 5 times to start the flow of toner into the toner hopper. q If the toner cartridge was sufficiently shaken as described in step 3, it will take about 50 seconds for the cartridge to empty. Do not remove the cartridge until it is empty. If not empty, tap on the top of the cartridge again until empty. 8 Slide the empty toner cartridge back along the guides and remove it. q The cartridge opening will be closed as it is moved back along the guides. 9 Slide the toner hopper into the copier and return the toner hopper lock lever into place. 10 Close the front cover. NOTE: Add only one cartridge of toner.