Sharp AR-337 AR-287 , AR-337 , AR-407 Operation Manual - Page 91
Misfeed in the RADF
![]() |
View all Sharp AR-337 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
MISFEED REMOVAL 5 CHAPTER A MISFEED HAS OCCURRED. CLEAR INDICATED AREA. PRESS FOR RECOVERY INSTRUCTIONS. Misfeed in the RADF When the RADF misfeeds an original sheet, the copier will stop and the misfeed message will appear. An original misfeed may occur at one of three locations: (A) in the RADF feed section, (B) in the exit roller, or (C) under the transport belt. A C Feeding roller cover B (A) Open the feeding roller cover and pull the original gently to the right and out from the document feeder tray. l Be sure to open and close the document feeder cover to cancel the misfeed display. (B) Open the exit roller cover and gently pull the original out. l Be sure to open and close the document feeder cover to cancel the misfeed display. Exit roller cover (C) Open the feeding roller cover and the document feeder cover, and remove the original. NOTE: After misfed originals are removed from locations A, B and/or C, a message may appear indicating the number of originals which must be returned to the document feeder tray. Return the originals and press the START key to resume copying. 5-3 COPIER TROUBLE? Misfeed removal
![](/manual_guide/products/sharp-ar287-ar287-ar337-ar407-operation-manual-e887300/91.png)