Sharp AR M550N AR-M550 AR-M620 AR-M700 Operation Manual - Page 51
Misfeed in the bypass tray, Gently close the side cover.
View all Sharp AR M550N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
MISFEED REMOVAL I Misfeed in the bypass tray 1 Remove the misfed paper from the bypass tray. Be careful not to tear the misfed paper during removal. 5 Remove the misfed paper. Check the paper transfer unit inside the tray and remove any misfed paper. 2 If you did not find a misfeed in step 1, open the side cover and remove the misfeed. 3 Gently close the side cover. 6 Gently close paper tray 1 - tray 2. 2 Push the tray all the way back in. Make sure that the misfeed message no longer appears (the normal message display should appear). 4 Remove tray 1 - tray 2. Grasp the finger hold and gently open the unit. Pull the tray all the way out until it stops. NOTE If a misfeed occurs during printing from the bypass tray while paper is being loaded in tray 1 - tray 2, push tray 1 - tray 2 back in to close it, and then pull the tray out again. 2-23