Sharp AR M550N AR-M550 AR-M620 AR-M700 Operation Manual - Page 52
Misfeed in the tray 5, Open the top cover of tray 5.
View all Sharp AR M550N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
MISFEED REMOVAL I Misfeed in the tray 5 1 Open the side cover. 6 Open the top cover and remove the misfed paper. After removing the misfed paper, close the top cover. 2 Remove the misfed paper. Be careful not to tear the misfed paper during removal. 7 Remove tray 1 - tray 2. Grasp the finger hold and gently open the unit. Pull the tray all the way out until it stops. 3 Gently close the side cover. 4 Close the bypass tray. 5 Open the top cover of tray 5. NOTE If a misfeed occurs in the following situation, push tray 1 - tray 2 back in to close it and then pull the tray out again: G A misfeed occurs during printing from tray 5 while paper is being loaded in tray 1 or tray 2. 8 Remove the misfed paper. Check the paper transfer unit inside the tray and remove any misfed paper. 9 Gently close paper tray 1 - tray 2. Push the tray all the way back in. Make sure that the misfeed message no longer appears (the normal message display should appear). 2-24