Sharp AR M550N AR-M550 AR-M620 AR-M700 Operation Manual - Page 68
When a punch module is installed, Close the front cover of the inserter only
View all Sharp AR M550N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
FINISHER AND SADDLE STITCH FINISHER 11Remove the misfed paper. Be careful not to tear the misfed paper during removal. 17Close the lower cover of the saddle stitch finisher. 12Close the entrance cover of the saddle stitch unit. 18Close the front cover of the inserter (only when an inserter is installed). 13Turn the right-hand knob 1 counter clockwise. Then, push the left-hand knob 2 and turn it clockwise. I When a punch module is installed 19Open the cover of the hole punch module. 14Remove any paper misfed on the exit side of the saddle stitch unit. Be careful not to tear the misfed paper during removal. 20Rotate the green knob until the arrow is within the range (A) on the label, and remove the misfed paper. Be careful not to tear the (A) misfed paper during removal. 15Open the exit cover of the saddle stitch unit and remove any misfed paper. Be careful not to tear the misfed paper during removal. 21Close the cover of the hole punch module. 16Close the exit cover of the saddle stitch unit. 22Push the finisher back against the main unit. 3-12