Sharp MX-B201D MX-B201D Operation Guide - Page 34
ID CARD COPY, Press the [E-SORT.SP.FUNC] key until ID CARD COPY
View all Sharp MX-B201D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
ID CARD COPY You can copy the front and reverse sides of ID card onto a page through this function. The ID card print image is shown as follows. Originals Copies Front Back • ID card copy feature cannot be used in combination with two-sided copy and sort functions. • The following paper sizes can be used: 8.5"x5.5"R, 8.5"x11", 8.5"x14", A5R, A4, B5 and 16K. (8.5"x5.5"R and A5R can only be used in bypass tray.) • The image may cut off even if using standard paper size. • In ID card copy mode, scan area and scan number (1 page) cannot be changed. Scan area is: X: 2-1/8" + 1/4" (54 + 5 mm) (margin), Y: 3-3/8" + 3/8" (86 + 10 mm) (top margin 1/4" (5 mm) and bottom margin 1/4" (5 mm)). • Only making a single copy is available (Number of copies cannot be set.). 1 Press the [E-SORT.SP.FUNC] key until "ID CARD COPY" appears and the press the [OK] key. 2 Press the [ ] key ( ) to move " " to the "ON" position and then press the [OK] key. 3 Place the ID card on the document glass, align with the ID card mark, and press the [START] ( ) key. When scan is finished, [START] ( ) key indicator will blink and one side of the ID card is scanned into memory. (In this case, print will start if pressing READ-END (#) key.) ID CARD mark 4 Turn and replace the ID card on the document glass, and press the [START] ( ) key. When scan is finished, copy will begin. To cancel ID card copy, press the [CLEAR] ( ) key and make sure the [START] ( ) key indicator is off. 33