Sharp MX-B201D MX-B201D Operation Guide - Page 89
TROUBLESHOOTING AND MAINTENANCE, Indication, Cause and remedy, Lamp indicator, Display
View all Sharp MX-B201D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
TROUBLESHOOTING AND MAINTENANCE Indication Lamp indicator Display Cause and remedy Page Blinks INSTALL A NEW TONER CARTRIDGE The toner cartridge is not installed correctly. Reinstall the toner cartridge. 105 Error indicator TONER CARTRIDGE IS Steadily NEAR EMPTY. Replacement of toner cartridge will be needed soon. Prepare a new cartridge. 105 lit MAINTENANCE REQUIRED CALL FOR SERVICE Service by an authorized SHARP service technician is required. - MEMORY FULL, PRESS START TO Data is being held in memory. Print the RESUME. data or clear it from memory. 27 NO 2-SIDED COPY FROM BYPASS Two sided printing or 2 IN 1 copying is TRAY. selected when the bypass tray is already selected ,or the bypass tray is selected NO 2IN1 COPY FROM BYPASS TRAY. when two-sided printing or 2 IN 1 23 copying is already selected. 28 The bypass tray cannot be used. Press the [TRAY SELECT] key ( ) to select a paper tray. NO 2IN1 COPY WITH MARGIN SHIFT. 2 IN 1 copy and margin shift cannot be used in combination. Cancel the function what was selected last. 28 31 COPY RATIO CAN NOT BE CHANGED IN 2IN1. Copy ratio can not be changed in 2 IN 1 22 copy. 28 THIS MENU IS NOT SELECTABLE WITH DATA. This appears if you attempt to change a user program setting while a copy or print job is in progress. 74 There is no paper for printing. Press the NO XXXX SIZE TRAY [MODE SELECT] key to switch to printer mode and follow the instructions in the - display. ("XXXX" indicates paper size) An original remains on the document glass, or the original is too thick to scan. 18 Remove the original. CHECK SPF/RSPF. START TO RESUME. If the message is no cleared when there is not original on the document glass, the underside of the RSPF is dirty. Clean 109 the underside of the RSPF. (especially areas where black lines appear.) Printing is not possible if the paper size setting is different from the size of paper loaded in the tray. Load the same size of LOAD XXXX PAPER INTO TRAY. paper as the paper size setting and then press the [START] key ( ). Printing will 12 begin. ("XXXX" indicates paper size. The tray is indicated in .) NO PC COMMUNICATION; CHECK CABLE. The machine is not correctly connected to the computer. Check the cable (when using the scanner function). 39 NO ID CARD COPY WITH SPECIAL FUNCTIONS When selected ID Card Copy, Sort Copy, 2 in 1 Copy and Margin Shift function cannot be used. 26 28 31 88