Sharp MX-B201D MX-B201D Operation Guide - Page 88
Troubleshooting And Maintenance, Display Messages - user manual
View all Sharp MX-B201D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
10 Chapter 10 TROUBLESHOOTING AND MAINTENANCE Problems related to general use of the machine, the copy function, and software setup are explained here. Be sure to check the problem carefully before calling for service, as many problems can be solved by the user. If you are unable to solve the problem, turn off the main switch, unplug the power cord from the outlet, and contact your dealer. For problems related to the printer and scanner functions, see the online manual. DISPLAY MESSAGES When the following indicators light up or blink on the operation panel or the following alphanumeric codes appear in the display, solve the problem immediately referring to both the table below and the indicated page. Be sure to use only genuine SHARP parts and supplies. Indication Lamp indicator Display Cause and remedy Page BYPASS : ADD PAPER Tray location Blinks indicator TRAY : ADD PAPER The indicated paper tray is not attached, is attached incorrectly, or has run out of paper. (The tray is indicated in .) 12 14 CLOSE PAPER TRAY CLEAR PAPER A paper misfeed has occurred. JAM. Remove the misfeed as explained in 101 SPF/RSPF JAM. "MISFEED REMOVAL". FRONT OR SIDE COVER OPEN. The cover is open. Close the cover. - CLOSE COVERS. CLOSE THE SPF/ The document feeder cover is open. Close RSPF COVER. the document feeder cover. - Error indicator Blinks REPLACE THE TONER CARTRIDGE. The toner cartridge is empty. Replace the toner cartridge with a new cartridge. (When the indicator blinks, the machine 105 does not operate.) When [F2-02] appears, check the toner cartridge and make sure that the seal is - not still affixed. SYSTEM ERROR [XX - XX] REFER The machine will not function. Turn the power switch off, wait about 10 seconds, TO USER GUIDE and then turn on the switch again. If this does not clear the error, remove the - power cord from the outlet, and contact your authorised service representative. 87