Sharp MX-B201D MX-B201D Operation Guide - Page 76
MIN., PATTERN 1, 300dpi, HI-SPEED, 10 mm, Program, number, Program name, Setting codes, Explanation
View all Sharp MX-B201D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
USER SETTINGS Program number Program name Setting codes (factory default setting appears in bold) Explanation 1: 5 MIN. 4 AUTO SHUT-OFF TIME 2: 30 MIN. 3: 60 MIN. 4: 120 MIN. 5: 240 MIN. • This function automatically switches the machine to a state that consumes even less power than preheat mode if the set duration of time elapses without the machine being used when the power is on. All lights except the power save indicator go off. To resume normal operation, press the [START] key ( ). Normal operation also resumes automatically when a print job is received or scanning is begun from a computer. While in auto power shut-off mode, no keys (except the [START] key ( )) can be used. • Use this setting to select the 7 LAYOUT IN 2IN1 1: PATTERN 1 2: PATTERN 2 layout pattern when two original pages are copied onto a single sheet of paper (see page 28 for the layout patterns). 8 OFFSET FUNCTION 1: ON 2: OFF • When enabled, this function offsets the position in the paper output tray of sets of copies during copy job, and print jobs when using the printer function. 9 ROTATE ORIG. IMAGE 1: ON 2: OFF • When two-sided copying is performed, this function rotates the image on the back of the original. This is convenient when binding the copies at the top (tablet binding). 10 AE/TEXT RESOLUTION 1: 300dpi 2: 600dpi • This setting is used to change the copy resolution in AUTO and TEXT mode from 600 x 300 dpi to 600 x 600 dpi (highquality mode). Scanning is slower when high-quality mode is used. 11 2-SIDED COPY MODE 1: HI-SPEED 2: NORMAL • If the memory fills up when twosided copying is performed, "NORMAL" can be selected to make copying possible. However, "NORMAL" results in a slower copying speed. Normally "HI-SPEED" is selected to enable fast twosided copying. 1: 5 mm 12 MARGIN WIDTH 2: 10 mm 3: 15 mm 4: 20 mm • Use this setting to set the margin width. 75