Singer Quantum Stylist 9985 Instruction Manual - Page 76
Automatic Bar-tack, And Darning
View all Singer Quantum Stylist 9985 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
AUTOMATIC BAR-TACK AND DARNING You can sew automatic bar-tack and darning using the buttonhole foot. No. 118 Bar-tack, to reinforce areas that will be subject to strain, such as pocket corners. No. 119 Darning, mending and other applications. Buttonhole Foot (F) 1. Adjust slide on base of buttonhole foot according to the length of the bar-tack or darning to be sewn. a= Length of bar-tack or darning 2. Pass upper thread through the hole of buttonhole foot and bring upper thread to the left. 3. Position fabric under presser foot so that the starting point is on the thick area. Lower the foot. b. When sewing the bar-tack on the edge of thick fabric, such as a pocket, place a cardboard or fabric piece of the same thickness beside the fabric to help keep the foot level as you sew. 4. Lower the buttonhole lever completely. Note: Machine will not start to sew if buttonhole lever is not lowered properly or buttonhole foot is not positioned correctly. 5. Hold upper thread lightly and start the machine. 6. Machine will sew bar-tack or darning stitch as shown. Machine will stop automatically when the pattern is finished. 7. Press the thread cutter button and raise the presser foot lifter to remove the fabric. 1 2 3 4 1 2 76