Sony DSC-M1 Operating Instructions - Page 111
Meaning/Corrective Action, Printer busy - problem
UPC - 027242665576
View all Sony DSC-M1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Message Invalid operation Turn the power off and on again Enable printer to connect Connect to device No printable image Printer busy Paper error Ink error Printer error Processing Meaning/Corrective Action • You are playing back a file that was created on equipment other than this camera. • The battery level is low or zero. Charge the battery pack (page 14). Depending on the conditions of use or the type of battery pack, the indicator may flash even though there are still 5 to 10 minutes of remaining battery time left. • Camera shake may occur due to insufficient light. Use the flash, mount the camera on a tripod, or otherwise secure the camera in place. • A problem with the lens caused an error. • [USB Connect] is set to [PictBridge], however the camera is connected to a non-PictBridge compliant device. Check the device. • Depending on the circumstances, the connection may not be established. Disconnect and connect the USB cable again. If an error message is indicated on the printer, refer to the operating instructions supplied with the printer. • You tried to print images before the printer connection was established. Connect to a PictBridge compliant printer. • You tried to execute [DPOF image] without checking the mark. • You tried to execute [All In This Folder] while selecting the folder that stores only movies. You cannot print movies. • Since the printer is busy, it cannot receive print requests. Check the printer. • A paper error occurred, such as paper-out, paper-jam, etc. Check the printer. • An ink error has occurred in the connected printer, or the ink level is low. Check the printer. • The camera received an error from the printer. Check the printer, or check if the image you want to print is corrupted. • The data transmission to the printer may not be completed yet. Do not disconnect the USB cable. • The printer is performing the printing stop processing. Printing is not possible until this processing is completed. This processing may take some time depending on the printer. Troubleshooting 111