Sony DSC-M1 Operating Instructions - Page 16
min, To charge the battery pack, only using the AC Adaptor, Battery remaining indicator - cyber shot
UPC - 027242665576
View all Sony DSC-M1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
To charge the battery pack only using the AC Adaptor You can charge the battery pack without the Cyber-shot Station, such as during your travels. Connect the DC plug of the AC Adaptor to the camera with the apex of the v mark on the camera and the apex of the v mark on the DC plug facing. Multi connector 1 AC Adaptor DC plug To wall outlet 2 (wall socket) 3 Power cord (mains lead) • Be sure to turn off your camera when charging the battery pack (page 19). • When placing the camera, make sure the LCD screen is facing up. • After charging the battery pack, disconnect the AC Adaptor both from the multi connector of the camera and from a wall outlet (wall socket). Battery remaining indicator The battery remaining indicator on the LCD screen shows the remaining shooting or viewing time. Remaining indicator 60min Remaining time • In standby mode, the battery remaining time for still image shooting is indicated. • The displayed time remaining may not be correct under certain circumstances or conditions. Charging time Approximate time to charge a completely discharged battery pack using the AC Adaptor at a temperature of 25°C (77°F). Battery pack NP-FT1 (supplied) Charging time (min.) Approx. 150 • The charging time may become longer under certain circumstances or conditions. To remove the battery pack Battery eject lever Open the battery cover. Slide the battery eject lever in the direction of the arrow, and remove the battery pack. • Be careful not to drop the battery pack when removing it. 16