Sony DSC-M1 Operating Instructions - Page 14

Getting started, Charging the battery pack, Connect the AC Adaptor - station

Page 14 highlights

Getting started Charging the battery pack Cyber-shot Station DC IN jack AC Adaptor 1 , Open the battery cover. Slide the cover in the direction of the arrow. • Be sure to turn off your camera when charging the battery pack (page 19). • Your camera operates with the "InfoLITHIUM" NP-FT1 battery pack (T type) (supplied). You can use only T type battery pack (page 120). 2 , Install the battery pack, then close the battery cover. Make sure the battery pack is firmly inserted all the way, then close the cover. Battery insertion slot Facing the V marks on the side of the battery pack in the same direction as the V mark on the battery insertion slot, insert the battery pack until it is locked. 3 DC plug , Connect the AC Adaptor (supplied) to the DC IN jack of the Cyber-shot Station (supplied). Connect the DC plug with the v mark facing up. • Do not short the DC plug of the AC Adaptor with a metallic object, as this may cause malfunction. • Clean the DC plug of the AC Adaptor with a dry cotton bud. Do not use the dirty plug. Use of the dirty plug may not properly charge the battery pack. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

14
Charging the battery pack
,
Open the battery cover.
Slide the cover in the direction of the arrow.
Be sure to turn off your camera when
charging the battery pack (page 19).
Your camera operates with the
“InfoLITHIUM” NP-FT1 battery pack (T type)
(supplied). You can use only T type battery
pack (page 120).
,
Install the battery pack, then
close the battery cover.
Make sure the battery pack is firmly
inserted all the way, then close the cover.
Battery insertion slot
Facing the
V
marks on the side
of the battery pack in the same
direction as the
V
mark on the
battery insertion slot, insert the
battery pack until it is locked.
,
Connect the AC Adaptor
(supplied) to the DC IN jack of
the Cyber-shot Station
(supplied).
Connect the DC plug with the
v
mark
facing up.
Do not short the DC plug of the AC Adaptor
with a metallic object, as this may cause
malfunction.
Clean the DC plug of the AC Adaptor with a
dry cotton bud. Do not use the dirty plug. Use
of the dirty plug may not properly charge the
battery pack.
1
2
3
DC plug
AC Adaptor
DC IN jack
Cyber-shot Station
Getting started