Sony DSC-P92 Operating Instructions (primary manual) - Page 13
Battery remaining indicator, When using the Nickel-Metal, Hydride batteries, The Power Save function - no image on display
View all Sony DSC-P92 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Getting started Battery remaining indicator (When using the Nickel-Metal Hydride batteries) As the battery power decreases with use, the battery remaining indicator displays the amount of power remaining using the following symbols. Battery Battery remaining remaining guidelines indicator (A full charge is 100%) Sufficient power remaining Battery half full Battery low, recording/ playback will stop soon. Change the batteries for fully charged ones, or charge these batteries. (The warning indicator flashes.) • If the LCD screen is off, press to turn it on. • Based on the conditions under which the camera is being used and the state of the charge, or on the environment, this information may not be correctly indicated. • When the AC Adaptor (not supplied) is being used, the remaining battery information is not displayed. The Power Save function When the Power Save function is set to On, you can shoot for a longer period of time. Turn the mode selector to SET UP, and set [Power Save] in Setup 1 to [On]. The factory setting of the camera is set to [On] (page 103). We recommend that you set [Power Save] to [On] when using alkaline batteries. When the Power Save function is On • In shooting still images, the focus only focuses when the shutter is pushed down halfway. • While charging the flash, the lamp flashes and the LCD screen is turned off. After the flash is completely charged, the LCD screen turns on. 13