Sony DSC-P92 Operating Instructions (primary manual) - Page 93

Symptom You cannot format a "Memory Stick." You have formatted a "Memory Stick" by mistake. Cause Solution • The write-protect switch on the "Memory Stick" p Set it to the recording position (page 105). is set to the LOCK position. • All the data on the "Memory Stick" are erased by p We recommend that you set the "Memory Stick" write-protect formatting. switch to the LOCK position to protect accidental erasure (page 105). Others Symptom Cause Solution The camera does not work, no operations can be performed. • The battery level is low or zero (The indicator appears.). • The AC Adaptor (not supplied) is not connected securely. p Charge the batteries (page 10). p Connect it securely to the DC IN jack of the camera and to a wall outlet (wall socket) (page 15). The power is on, but the • The internal system is not working properly. camera does not work. p Remove, and then, after one minute, reinstall the batteries and turn on the camera. If this does not work, press the RESET button located inside the jack cover with a pointed object, then turn the power on again. (This will clear the date and time settings, etc.) You cannot identify the - indicator on the LCD screen. p Check the indicator (pages 109 to 111). The lens gets fogged. • Condensation is occurring. p Turn off the camera, leave the camera for about an hour and then try to use it again (page 104). The camera gets hot if you - use it for a long time. p This is not a malfunction. The lens does not move when you turn off the camera. • The batteries are discharged. p Replace them with charged batteries or use the AC Adaptor (not supplied) (pages 10, 12, 15). Troubleshooting 93