Sony HDMS-S1D Operating Instructions - Page 4
Notes About the Discs, Precautions - remote
UPC - 027242714977
View all Sony HDMS-S1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Notes About the Discs • To keep the disc clean, handle the disc by its edge. Do not touch the surface. • Do not expose disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the car. • After playing, store the disc in its case. • Clean the disc with a cleaning cloth. Wipe the disc from the center out. • Do not use solvents such as benzine, thinner, commercially available disc/lens cleaners, or anti-static spray intended for vinyl LPs. • If you have printed the disc's label, dry the label before playing. Precautions Usage and storage • Only use the specified power cord. • Never short-circuit any of the connectors with a metallic object such as a keyholder. • Do not leave the unit in locations where the temperature may rise above 60°C (140°F), such as in direct sunlight. • Protect the unit from water and moisture. • Use the unit on a flat level surface. • Do not install this equipment in a confined space such as a bookshelf or similar unit. • To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. • Turn off the unit before carrying it. • Do not touch the memory card while copying. • Do not place any objects on the unit. • Do not place the remote control on the floor, etc., as buttons may be pressed by mistake. • Do not place the unit upright. • Watch the screen in a bright room. • Keep this unit away from children. If any part of the unit is swallowed, promptly see a doctor. On power sources The Media Storage is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the unit itself has been turned off. Overheating If the unit has become hotter than normal during operation, turn off the unit, disconnect the power cord, and contact a service center. Condensation If the unit is brought from a cold to a warm location, or if the ambient temperature suddenly rises, moisture may form on the outer surface and on the interior of the unit. Do not use the unit in such a condition, as damage may occur. If condensation has occurred, leave the unit for about an hour before turning it on. 4