Sony RDR VX500 Operating Instructions - Page 19
Connecting to audio/video input, jacks, Connecting to an antenna input, Setting the RF Output channel
UPC - 027242657441
View all Sony RDR VX500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
A Connecting to audio/video input jacks If your TV, monitor, projector, or other equipment has audio/video (A/V) input jacks, you will get better picture and sound if you connect the recorder using this connection. Yellow Yellow White (L) White (L) Red (R) Red (R) B Connecting to an antenna input jack If your TV does not have audio/video (A/V) input jack, connect the recorder to a TV using an antenna cable. Setting the RF Output channel When connecting the recorder to the TV using only the antenna cable, you must set the RF Output channel in the "Tuner Preset" so that the TV can receive the correct signal from the recorder. "/1 TV/VIDEO 1 Press "/1 to turn on the recorder. 2 Press TV/VIDEO repeatedly until "TV" disappears from the front panel display. 3 Turn on your TV and set it to the channel 3. When using channel 4 to receive the recorder signal, see "3, 4 Ch Out" on page 98. ,continued 19 Hookups and Settings