Sony RDR VX500 Operating Instructions - Page 27

Controlling TVs with the remote You can adjust the remote control's signal to control your TV. If you connected the recorder to an AV amplifier (receiver), you can also use the supplied remote to control the AV amplifier's (receiver's) volume. Notes • Depending on the connected unit, you may not be able to control your TV or AV amplifier (receiver) with some or all of the buttons below. • If you enter a new code number, the code number previously entered will be erased. • When you replace the batteries of the remote, the code number may be reset to the default setting. Set the appropriate code number again. TV/DVD·VIDEO switch "/1 Number buttons, SET CH +/- VOL +/- TV/VIDEO 1 Slide the TV/DVD·VIDEO switch to TV. 2 Hold down "/1. 3 Enter your TV's manufacturer code (see below) using the number buttons. 4 Release "/1. When the TV/DVD·VIDEO switch is set to TV, the remote performs the following: Press To "/1 Turn your TV on or off VOL +/- Adjust the volume of your TV CH +/- Select the channel on your TV TV/VIDEO Switch your TV's input source Number buttons and Select the channel on SET your TV Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. Manufacturer Sony Akai AOC Centurion Coronado Curtis-Mathes Daewoo Daytron Fisher General Electric Hitachi J.C.Penney JVC KMC LG/Gold Star Magnavox Marantz MGA/Mitsubishi NEC Panasonic Philco Philips Pioneer Portland Proscan Quasar Radio Shack RCA Sampo Samsung Sanyo Scott Sears Sharp Code number 01 (default) 04 04 12 03 12, 14 04, 22 03, 12 11 04, 06, 10 02, 03, 04 04, 10, 12 09 03 03, 04, 17 03, 04, 08, 12, 21 04, 13 04, 12, 13, 17 04, 12 06, 19 02, 03, 04, 08 08, 21 06, 16 03 10 06, 18 05, 10, 14 04, 10 12 03, 04, 12, 20 11, 14 12 07, 10, 11 03, 05, 18 ,continued 27 Hookups and Settings