TP-Link Archer D5 Archer D5 V1 User Guide - Page 33
Archer, VPI 0~255, VCI 1~65535, Advance, Encapsulation Mode, ATM Qos Type, Enable IPv4, IP Address,
View all TP-Link Archer D5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-5 ATM Configuration: VPI (0~255): Identifies the virtual path between endpoints in an ATM network. The valid range is from 0 to 255. Please input the value provided by your ISP. VCI (1~65535): Identifies the virtual channel endpoints in an ATM network. The valid range is from 1 to 65535 (1 to 31 is reserved for well-known protocols). Please input the value provided by your ISP. Click Advance, the advanced selections of ATM Configuration can be shown. Encapsulation Mode: Select the encapsulation mode for the Static IP Address. Here you can leave it by default. ATM Qos Type: Select ATM Qos Type provided by your ISP. The default type is UBR. WAN Service Setup: Enable IPv4:Check the box to enable IPv4. IP Address: Enter the IP address in dotted-decimal notation provided by your ISP. Subnet Mask: Enter the subnet Mask provided by your ISP, which is usually 255.255.255.0. 22