TP-Link Archer D5 Archer D5 V1 User Guide - Page 91

Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide  IP Address: The IP address of the PC running the service application.  Protocol: The protocol used for this application. The options are TCP, UDP, or All (all protocols supported by the modem router).  Status: The status of this entry, "Enabled" means the virtual server entry is enabled.  Edit: To modify or delete an existing entry. To set up a virtual server entry: 1. Click the Add New button. (shown in Figure 4-72) 2. Select the service you want to use from the Common Service Port list. If the Common Service Port menu does not list the service that you want to use, enter the number of the service port or service port range in the Service Port field. 3. Enter the IP address of the computer running the service application in the IP Address field. 4. Select the protocol used for this application in the Protocol drop-down list, either TCP, UDP, or All. 5. Select the Enabled option in the Status drop-down list. Click the Save button.  Note: Figure 4-72 It is possible that you have a computer or server that has more than one type of available service. If so, select another service, and type the same IP address for that computer or server. To modify or delete an existing entry: 1. Find the desired entry in the table. 2. Click Edit as desired on the Edit column. Click the Enable/ Disabled Selected button to make selected entries enabled/ disabled. Click the Delete Selected button to delete the selected entries.  Note: If you set the service port of the virtual server as 80, you must set the Web management port on 80