TP-Link Archer D5 Archer D5 V1 User Guide - Page 90
Forwarding
View all TP-Link Archer D5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Prefix Length: The prefix length of the destination IPv6 address. Gateway: Type in the correct IPv6 Gateway address for the IPv6 Static Route. Interface: Select the Interface from the drop-down list. Status: Select Enabled or Disabled from the drop-down list. 3. Click Save to save your settings. To modify or delete an existing entry: 1. Find the desired entry in the table. 2. Click Edit as desired on the Edit column. Click the Enable/ Disabled Selected button to make selected entries enabled/ disabled. Click the Delete Selected button to delete the selected entries. 4.14 Forwarding There are four submenus under the Forwarding menu: Virtual Server, Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the corresponding function. 4.14.1 Virtual Server Choose menu "Forwarding" → "Virtual Server", and then you can view and add virtual servers in the next screen (shown in Figure 4-71). Virtual servers can be used for setting up public services on your LAN. A virtual server is defined as a service port, and all requests from Internet to this service port will be redirected to the computer specified by the server IP. Any PC that was used for a virtual server must have a static or reserved IP address because its IP address may change when using the DHCP function. Figure 4-71 Service Port: The numbers of External Service Ports. You can enter a service port or a range of service ports (the format is XX - YY; XX is the Start port and YY is the End port). 79