TP-Link Archer MR400 Archer MR400EU V1 User Guide - Page 63
Set up a VPN Connection, and WAN IP.
View all TP-Link Archer MR400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Chapter 11 Specify Your Network Settings 11. 7. Set up a VPN Connection VPN (Virtual Private Network) is a private network established across the public network, generally via the internet. However, the private network is a logical network without any physical network lines, so it is called Virtual Private Network. With the wide application of the internet, more and more data need to be shared through the internet. Connecting the local network to the internet directly, though can allow the data exchange, will cause the private data to be exposed to all the users on the internet. The VPN (Virtual Private Network) technology is developed and used to establish the private network through the public network, which can provide a secure communication to a remote computer or remote network, and guarantee a secure data exchange. IPSec is one of the major implementations of VPNs. I want to: Establish an IPSec VPN tunnel to connect two LANs via internet so that the hosts in different remote LANs are able to communicate with each other as if they are in the same LAN. For example, I am the network administrator of a regional office, I need to let my office staff to visit the headquarters' servers and resources, and vice versa. I know that the router in my office and the device in headquarters both support IPSec VPN feature, so I decide to set up a VPN connection with the headquarter office. The following diagram is a typical VPN topology. Here Site A refers to regional office's network (local network). And Site B refers to the headquarters' network (remote network) which I want to connect to. Site A Site B Router 1 WAN: 219.134.112.246 LAN: 192.168.1.1 Subnetmask: 255.255.255.0 PC 1 WAN: 219.134.112.247 Router 2 LAN: 192.168.2.1 Subnetmask: 255.255.255.0 PC 2 How can I do that? 1. 1. Make sure of the topology you want to build and record site A (local network) and site B (remote network)'s LAN IP and WAN IP. 2. Configuration on site A (local network). 59