TP-Link Archer MR400 Archer MR400EU V1 User Guide - Page 64
B's WAN IP address., of Site A.
View all TP-Link Archer MR400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Chapter 11 Specify Your Network Settings 1 ) Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 ) Go to Advanced > VPN > IPSec VPN to open the configuration page. Click Add to set up a VPN tunnel. 3 ) In the IPSec Connection Name column, specify a name. 4 ) In the Remote IPSec Gateway (URL) column, Enter Site B's WAN IP address. 5 ) To configure Site A's LAN: In the Tunnel access from local IP addresses column, here we take Subnet Address as an example. Then input the LAN IP range of Site A in the IP Address for VPN column, and input Subnet Mask of Site A. 6 ) To configure Site B's LAN: In the Tunnel access from local IP addresses column, here we take Subnet Address as an example. Then input the LAN IP range of Site B in the IP Address for VPN column, and input 60