TP-Link Archer MR400 Archer MR400EU V1 User Guide - Page 65
Subnet Mask, Key Exchange Method, AutoIKE, Pre-Shared Key, Perfect Forward Secrecy, Advanced, Status
View all TP-Link Archer MR400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Chapter 11 Specify Your Network Settings Subnet Mask of Site B. 7 ) Select the Key Exchange Method for the policy. We select Auto(IKE) here. 8 ) Enter the Pre-Shared Key for IKE authentication. Then keep Perfect Forward Secrecy enabled. Note: Make sure Site A and Site B use the same key. 9 ) Leave the Advanced Settings as default value. Then click OK to save. 3. Configuration on Site B (remote network). Refer to step 2 configuration on Site A and make sure that Site A and Site B use the same pre-shared keys and Perfect Forward Secrecy settings. 4. The Status column will change to Up if the VPN connection has been set up successfully. 5. Check the VPN connection. You can ping site B' LAN IP from your computer to verify that the IPSec VPN connection is set up correctly. Tips: To check the VPN connection, you can do the following. a . On the host in Site A, press [Windows Logo] + [R] to open Run dialog. Input "cmd" and hit OK. b . In the CLI window, type in "ping 192.168.2.x" ("192.168.2.x" can be IP address of any host in Site B). Then press [Enter]. 61