TP-Link T2600G-18TSTL-SG3216 T2600G-28MPSUN V2 CLI Reference Guide Guide - Page 107

Syntax line { console linenum | vty startlinenum endlinenum | ssh | telnet } Parameter linenum -- The number of users allowed to login through console port. Its value is 0 in general, for the reason that console input is only active on one console port at a time. startlinenum --The start serial number of the login user selected to configure the login mode and password, ranging from 0 to 15. 0 means the first login user number, 1 means the second, and the rest can be done on the same manner. endlinenum -- The end serial number of the login user selected to configure the login mode and password, ranging from 0 to 15. 0 means the first login user number, 1 means the second, and the rest can be done on the same manner. ssh -- Configure the SSH terminal line. telnet -- Configure the Telnet terminal line. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Enter the Console port configuration mode and configure the console port 0: T2600G-28TS(config)#line console 0 Enter the Virtual Terminal configuration mode so as to prepare further configurations such as password and login mode for virtual terminal 0 to 5: T2600G-28TS(config)#line vty 0 5 12.8 password Description The password command is used to configure the connection password. To clear the password, please use no password command. 86