TP-Link T2600G-18TSTL-SG3216 T2600G-28MPSUN V2 CLI Reference Guide Guide - Page 395

Parameter name -- The entry name of View, ranging from 1 to 16 characters. Each View includes several entries with the same name. mib-oid -- MIB Object ID. It is the Object Identifier (OID) for the entry of View, ranging from 1 to 61 characters. include | exclude -- View Type, with include and exclude options. They represent the view entry can/cannot be managed by the SNMP management station individually. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Add a View named view1, configuring the OID as 1.3.6.1.6.3.20, and this OID can be managed by the SNMP management station: T2600G-28TS(config)# snmp-server view view1 1.3.6.1.6.3.20 include 41.3snmp-server group Description The snmp-server group command is used to manage and configure the SNMP group. To delete the corresponding SNMP group, please use no snmp-server group command. SNMP v3 provides the VACM (View-based Access Control Model) and USM (User-Based Security Model) mechanisms for authentication. The users in the SNMP Group can manage the device via the Read View, Write View and Notify View. And the authentication mode and the privacy mode guarantee the high security for the communication between the management station and the managed device. Syntax snmp-server group name [ smode { v1 | v2c | v3 }] [ slev { noAuthNoPriv | authNoPriv | authPriv }] [ read read-view ] [ write write-view ] [ notify notify-view ] no snmp-server group name smode { v1 | v2c | v3 } slev { noAuthNoPriv | authNoPriv | authPriv } 374