TP-Link T2600G-18TSTL-SG3216 T2600G-28MPSUN V2 CLI Reference Guide Guide - Page 311

and process data packets based on 4 chunk match conditions, each chunk can specify a user-defined 4-byte segment carried in the packet's first 128 bytes. Syntax access-list packet-content config acl-id rule rule-id {deny | permit} [chunk0 value mask0 mask] [chunk1 value mask1 mask] [chunk2 value mask2 mask] [chunk3 value mask3 mask] [tseg time-segment] Parameter acl-id -- The desired Standard-IP ACL for configuration. rule-id -- The rule ID. deny -- The operation to discard packets. permit --The operation to forward packets. It is the default value. value-- Specify the chunk value, ranging from 0-ffffffff. Mask --Specify the chunk mask, ranging from 0-ffffffff. Chunk mask here must be written completely in 4-byte hex mode, like '0000ffff'. time-segment -- The time-range for the rule to take effect. By default, it is not limited. Command mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Create a packet-content acl rule with all 4 chunks configured, the rule id is 1 and the default action is permit: T2600-28TS(config)# access-list packet-content config rule 1 permit chunk0 45ea mask0 0000ffff chunk1 1111ffff mask1 ffffffff chunk2 ee34 mask2 ffff0000 chunk3 7878 mask3 000ffae3 T2600-28TS(config)# access-list packet-content profile chunk-offset0 0 chunk-offset1 1 chunk-offset2 2 chunk-offset3 3 35.24 access-list bind(vlan) Note: Packet content ACL doesn't support VLAN bind. 290