TP-Link T2600G-18TSTL-SG3216 T2600G-28MPSUN V2 CLI Reference Guide Guide - Page 406

Parameter create -- Enable VLAN-created trap. It is sent when new VLAN is created successfully. delete -- Enable VLAN-deleted traps. It is sent when VLAN is deleted successfully. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Enable all SNMP extended VLAN-related traps for the switch： T2600G-28TS(config)# snmp-server traps vlan Enable VLAN-created trap only for the switch: T2600G-28TS(config)# snmp-server traps vlan create 41.13 rmon history Description The rmon history command is used to configure the history sample entry. To return to the default configuration, please use no rmon history command. RMON (Remote Monitoring), basing on SNMP architecture, functions to monitor the network. History Group is one of the commonly used RMON Groups. After a history group is configured, the switch collects network statistics information periodically, based on which the management station can monitor network effectively. Syntax rmon history index interface gigabitEthernet port [ interval seconds ] [ owner owner-name ] [ buckets number ] no rmon history index Parameter index -- The index number of the entry, ranging from 1 to 12, in the format of 1-3,5. port --The Ethernet port number. seconds -- The interval to take samplings from the port, ranging from 10 to 3600 in seconds. By default, it is 1800. 385