TP-Link T2600G-18TSTL-SG3216 T2600G-28MPSUN V2 CLI Reference Guide Guide - Page 45

encrypted password is configured, you should use the corresponding unencrypted password if you re-enter this mode. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. User Guidelines If both the enable password and enable secret are defined, you must enter the password set in enable secret. Example Set the secret password as "admin" and unencrypted to access Privileged EXEC Mode from User EXEC Mode. The password will be displayed in the encrypted form. T2600G-28TS(config)#enable secret 0 admin 2.5 configure Description The configure command is used to access Global Configuration Mode from Privileged EXEC Mode. Syntax configure Command Mode Privileged EXEC Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Access Global Configuration Mode from Privileged EXEC Mode: T2600G-28TS# configure T2600G-28TS(config)# 24