TP-Link T2600G-18TSTL-SG3216 T2600G-28MPSUN V2 CLI Reference Guide Guide - Page 173

Syntax dot1x quiet-period [ time ] no dot1x quiet-period Parameter time -- The length of the quiet-period time. If one user's authentication fails, its subsequent IEEE 802.1x authentication requests will not be processed during the quiet-period time. It ranges from 1 to 999 seconds and the default value is 10 seconds. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Enable the quiet-period function: T2600G-28TS(config)#dot1x quiet-period Enable the quiet-period function and set the quiet-period as 5 seconds: T2600G-28TS(config)#dot1x quiet-period 5 22.7dot1x timeout supplicant-timeout Description The dot1x timeout supplicant-timeout command is used to configure the supplicant timeout. To restore to the default, please use no dot1x timeout supplicant-timeout command. Syntax dot1x timeout supplicant-timeout time no dot1x timeout supplicant-timeout Parameter time --The maximum time for the switch to wait for the response from supplicant before resending a request to the supplicant., ranging from 1 to 9 in second. By default, it is 3 seconds. 152