TP-Link T2600G-18TSTL-SG3216 T2600G-28MPSUN V2 CLI Reference Guide Guide - Page 399

Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Add community public, and the community has read-write management right to View viewDefault: T2600G-28TS(config)# snmp-server community public read-write viewDefault 41.6snmp-server host Description The snmp-server host command is used to add Notification. To delete the corresponding Notification, please use no snmp-server host command. Syntax snmp-server host ip udp-port user-name [ smode { v1 | v2c | v3 }] [ slev { noAuthNoPriv | authNoPriv | authPriv }] [ type { trap | inform }] [ retries retries ] [ timeout timeout ] no snmp-server host ip user-name Parameter ip -- The IP Address of the management Host. Both IPv4 and IPv6 addresses are supported, for example 192.168.0.100 or fe80::1234. udp-port -- UDP port, which is used to send notifications. The UDP port functions with the IP address for the notification sending. It ranges from 1 to 65535. user-name -- The User name of the management station. smode -- The Security Model of the management station, with v1, v2c and v3 options. By default, the option is v1. slev -- The Security Level of SNMP v3 Group. There are three options, including noAuthNoPriv (no authorization and no encryption), authNoPriv (authorization and no encryption) and authPriv (authorization and encryption). By default, the option is "noAuthNoPriv". type -- The type of the notifications, with trap and inform options. Trap indicates traps are sent, while inform indicates informs are sent. The inform 378