TP-Link T2600G-18TSTL-SG3216 T2600G-28MPSUN V2 CLI Reference Guide Guide - Page 86

Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Set the GARP leaveall timer of Gigabit Ethernet port 1/0/6 as 2000 centiseconds and restore the join timer of it to the default value: T2600G-28TS(config)#interface gigabitEthernet 1/0/6 T2600G-28TS(config-if)#gvrp timer leaveall 2000 T2600G-28TS(config-if)#no gvrp timer join 9.5 show gvrp interface Description The show gvrp interface command is used to display the GVRP configuration information of a specified Ethernet port or of all Ethernet ports. Syntax show gvrp interface [ gigabitEthernet port | port-channel port-channel-id ] Parameter port -- The port number. port-channel-id -- The ID of the port channel. Command Mode Privileged EXEC Mode and Any Configuration Mode Privilege Requirement None. Example Display the GVRP configuration information of Gigabit Ethernet port 1: T2600G-28TS(config)#show gvrp interface gigabitEthernet 1/0/1 Display the GVRP configuration information of all Ethernet ports: T2600G-28TS(config)#show gvrp interface 65