TP-Link T2600G-18TSTL-SG3216 T2600G-28MPSUN V2 CLI Reference Guide Guide - Page 222

Privilege Requirement Only Admin and Operator level users have access to these commands. Example Configure the system contact information as www.tp-link.com: T2600G-28TS(config)# contact-info www.tp-link.com 27.9ip address Description This ip address command is used to configure the IP address and IP subnet mask for the specified interface manually. The interface type includes: routed port, port-channel interface, loopback interface and VLAN interface. Syntax ip address { ip-addr } { mask } [ secondary ] no ip address [ ip-addr ] [ mask ] Parameter ip-addr -- The IP address of the Layer 3 interface. mask -- The subnet mask of the Layer 3 interface. secondary -- Specify the interface's secondary IP address. If this parameter is omitted here, the configured IP address is the interface's primary address. Command Mode Interface Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Create the VLAN interface 2 with the primary IP address as 192.168.1.1/24 and secondary IP address as 192.168.2.1/24: T2600G-28TS(config)# interface vlan 2 T2600G-28TS(config-if)# ip address 192.168.1.1 255.255.255.0 T2600G-28TS(config-if)# ip address 192.168.2.1 255.255.255.0 secondary 201