TP-Link T2600G-18TSTL-SG3216 T2600G-28MPSUN V2 CLI Reference Guide Guide - Page 463

Syntax login authentication { method-list } no login authentication Parameter method-list -- Specify the login method list on the ssh terminal line. It is "default" by default, which contains the method "local". Command Mode Line Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Configure the login authentication method list on the ssh terminal line as "list1": T2600G-28TS(config)# line ssh T2600G-28TS(config-line)# login authentication list1 46.22 enable authentication(telnet) Description The enable authentication command is used to apply the privilege authentication method list to the telnet terminal line. To restore to the default authentication method list, please use the no enable authentication command. Syntax enable authentication { method-list } no enable authentication Parameter method-list -- Specify the enable method list on the telnet terminal line. It is "default" by default, which contains the method "none". Command Mode Line Configuration Mode 442