TP-Link T2600G-18TSTL-SG3216 T2600G-28MPSUN V2 CLI Reference Guide Guide - Page 108

Syntax password { [ 0 ] password | 7 encrypted-password } no password Parameter 0 -- Specify the encryption type. 0 indicates that an unencrypted password will follow. By default, the encryption type is 0. password -- Connection password, a string from 1 to 31 alphanumeric characters or symbols. The password is case sensitive, allows spaces but ignores leading spaces, and cannot contain question marks. By default, it is empty. 7 -- Indicates a symmetric encrypted password with fixed length will follow. encrypted-password -- A symmetric encrypted password with fixed length, which you can copy from another switch's configuration file. After the encrypted password is configured, you should use the corresponding unencrypted password if you re-enter this mode. Command Mode Line Configuration Mode Privilege Requirement Only Admin level users have access to these commands. User Guidelines If the password you configured here is unencrypted and the global encryption function is enabled in service password-encryption, the password in the configuration file will be displayed in the symmetric encrypted form. Example Configure the connection password of Console port connection 0 as "tplink" and unencrypted: T2600G-28TS(config)#line console 0 T2600G-28TS(config-line)#password 0 tplink Configure the connection password of virtual terminal connection 0-5 as "tplink" and unencrypted: T2600G-28TS(config)#line vty 0 5 T2600G-28TS(config-line)#password 0 tplink 87