TP-Link T2600G-18TSTL-SG3216 T2600G-28MPSUN V2 CLI Reference Guide Guide - Page 190

Example Enable logging to the console port: T2600G-28TS(config)# logging console 24.8logging console level Description The logging console level command is used to limit messages logged to the console port. System logs no higher than the set threshold level will be displayed on the console port. To restore the threshold level to default value, please use no logging console level command. Syntax logging console level level no logging monitor level Parameter level -- Severity level of the log information output to the console port. There are 8 severity levels marked with values 0-7. The smaller value has the higher priority. Only the log with the same or smaller severity level value will be output to the terminal devices. By default, it is 5 indicating that all the log information between level 0-5 will be output to the terminal devices. Command Mode Global Configuration Mode Privilege Requirement Only Admin and Operator level users have access to these commands. Example Output the log information with severity levels between 0-7 to the console port: T2600G-28TS(config)# logging console level 7 24.9logging monitor 169