TP-Link T2600G-18TSTL-SG3216 T2600G-28MPSUN V2 CLI Reference Guide Guide - Page 300

Parameter acl-id -- The desired Standard-IP ACL for configuration. rule-id -- The rule ID. deny -- The operation to discard packets. permit --The operation to forward packets. It is the default value. source-mac -- The source MAC address contained in the rule. source-mac-mask -- The source MAC address mask. It is required if you typed the source MAC address. destination-mac -- The destination MAC address contained in the rule. destination-mac-mask -- The destination MAC address mask. It is required if you typed the destination MAC address. vlan-id -- The VLAN ID contained in the rule, ranging from 1 to 4094. ethernet-type -- EtherType contained in the rule, in the format of 4-hex number. user-pri -- The user priority contained in the rule, ranging from 0 to 7. By default, it is not limited. time-segment -- The time-range for the rule to take effect. By default, it is not limited. source-ip -- The source IP address contained in the rule. source-ip-mask -- The source IP address mask. It is required if you typed the source IP address. destination-ip -- The destination IP address contained in the rule. destination-ip-mask -- The destination IP address mask. It is required if you typed the destination IP address. time-segment -- The time-range for the rule to take effect. By default, it is not limited. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. User Guidelines Before binding a Combined ACL to a VLAN or interface, you should configure the SDM template as "default" or "enterpriseV4" and save your configurations. For more information about SDM configuration, please refer to sdm prefer. 279