TP-Link T2600G-18TSTL-SG3216 T2600G-28MPSUN V2 CLI Reference Guide Guide - Page 498

T2600G-28MPS(config-if)# power inline consumption 50 49.10 power inline priority Description The power inline priority command is used to configure the PoE priority for the corresponding port Syntax power inline priority { low | middle | high } Parameter priority -- The PoE priority of the port. The priority levels include "high", "middle" and "low" in descending order. When the supply power exceeds the system power limit, the PD linked to the port with lower priority will be disconnected. By default, the priority level is "low". Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet) Privilege Requirement None. Example Configure the PoE priority as "low" for port 2: T2600G-28MPS(config)# interface gigabitEthernet 1/0/2 T2600G-28MPS(config-if)# power inline priority low 49.11 power inline supply Description The power inline supply command is used to configure the PoE status of the corresponding port. Syntax power inline supply { enable | disable } Parameter enable | disable -- The PoE status of the port. By default, the PoE status is "enable". 477