TP-Link T2600G-18TSTL-SG3216 T2600G-28MPSUN V2 CLI Reference Guide Guide - Page 166

Chapter 21 DoS Defend Commands DoS (Denial of Service) Attack is to occupy the network bandwidth maliciously by the network attackers or the evil programs sending a lot of service requests to the Host. With the DoS Defend enabled, the switch can analyze the specific field of the received packets and provide the defend measures to ensure the normal working of the local network. 21.1ip dos-prevent Description The ip dos-prevent command is used to enable the DoS defend function globally. To disable the DoS defend function, please use no ip dos-prevent command. Syntax ip dos-prevent no ip dos-prevent Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Enable the DoS defend function globally: T2600G-28TS(config)#ip dos-prevent 21.2ip dos-prevent type Description The ip dos-prevent type command is used to select the DoS Defend Type. To disable the corresponding Defend Type, please use no ip dos-prevent type command. 145