TP-Link T2600G-18TSTL-SG3216 T2600G-28MPSUN V2 CLI Reference Guide Guide - Page 431

the next sample is taken. The value ranges from 1024 to 65535 and the default value is 0 which means no packets will be sampled. maxHeader --Specify the maximum number of bytes that should be copied from a sampled packet. The value ranges from 18 to 256 and the default value is 128 bytes. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet) Privilege Requirement Only Admin and Operator level users have access to these commands. Example Configure Gigabit Ethernet port 1 as the sFlow sampler: specify the Collector-ID as 1, the ingress rate as 1024: T2600G-28TS(config)#interface gigabitEthernet 1/0/1 T2600G-28TS(config-if)#sflow sampler collector-ID 1 T2600G-28TS(config-if)#sflow sampler ingRate 1024 43.5show sflow global Description The show sflow global command is used to display the global configuration of sFlow. Syntax show sflow global Command Mode Privileged EXEC Mode and Any Configuration Mode Privilege Requirement None. Example Display the global configuration of sFlow: T2600G-28TS#show sflow global 410