TP-Link TL-WR543G User Guide - Page 36
Enable Wireless Security, Security Type, WPA-PSK/WPA2-PSK, WPA /WPA2, Security Options - wpa2 client mode
UPC - 845973051204
View all TP-Link TL-WR543G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
TL-WR543G 54M Wireless AP Client Router User Guide Figure 4-16 Wireless Settings in AP Client Router mode ¾ SSID - Enter a value of up to 32 characters. The same name (SSID) must be assigned to all wireless devices in your network. The default SSID is TP-LINK, but it is recommended strongly that you change your networks name (SSID) to a different value. This value is case-sensitive. For example, TP-LINK is NOT the same as tp-link. ¾ Enable Wireless Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the router without encryption. It is strongly recommended that you choose this option to encrypt your wireless network. The encryption settings are described below. ¾ Security Type - You can select one of the following authentication types: • WEP - Select WEP authentication type based on 802.11 authentications. • WPA-PSK/WPA2-PSK - Select WPA/WPA2 authentication type based on pre-shared passphrase. • WPA /WPA2 - Select WPA/WPA2 authentication type based on Radius Server. ¾ Security Options - You can select one of the following authentication options: • When you select WEP for authentication type you can select the following - 28 -