TRENDnet TEW-751DR User's Guide - Page 27
IPv6 Connection Settings, Save Settings
View all TRENDnet TEW-751DR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
TRENDnet User's Guide IPv6 Connection Settings Main > IPv6 IPv6 (Internet Protocol Version 6) is a new protocol that significantly increases the number of available Internet public IP addresses due to the 128-bit IP address structure versus IPv4 32-bit address structure. In addition, there are several integrated enhancements compared to the most commonly used and well known IPv4 (Internet Protocol Version 4) such as: • Integrated IPsec - Better Security • Integrated Quality of Service (QoS) - Lower latency for real-time applications • Higher Efficiency of Routing - Less transmission overhead and smaller routing tables • Easier configuration of addressing Note: In order to use IPv6 Internet connection settings, it is required that your ISP provide you with the IPv6 service. Please contact your ISP for availability and more information about the IPv6 service. 1. Log into your router management page (see "Access your router management page" on page 25). 2. Click on Main, and click on IPv6. TEW-751DR 3. Review the IPv6 Internet Connection settings and enter information settings specified by your ISP. Click Save Settings to save changes. Note: Please contact your ISP for IPv6 service availability. Select the IPv6 connection type provided by your ISP. • Auto Detection • Static IPv6 • Auto-configuration (SLAAC/DHCPv6) • PPPoE • IPv6 in IPv4 Tunnel • 6to4 • 6rd • Link-Local Only © Copyright 2013 TRENDnet. All Rights Reserved. 27