Toshiba 55WX800U User Manual - Page 17

Connecting an HDMI, or DVI device to the HDMI input

Page 17 highlights

Chapter 2: Connecting your TV Connecting an HDMI® or DVI device to the HDMI input HDMI device HDMI OUT DVI device HDMI cable Audio cable TV back panel OUT L R AUDIO DVI /HDCP OUT HDMI-to-DVI adapter cable The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (HighBandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-D compliant[1] consumer electronic devices (such as a settop box or DVD player with HDMI or DVI output). Supported signal formats: VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), 1080p (24Hz/60Hz). For signal specifications, see p. 86. Supported Audio format: Linear PCM, sampling rate 32/44.1/48 kHz. Note: • To connect a PC to the HDMI input, see p. 22. • Some legacy HDMI sources may not work properly with your HDMI TV, due to the adoption of new standards. Try the HDMI setting to Off (- p. 45). To connect an HDMI device, you will need: •one HDMI cable per HDMI device - Recommendation: For proper operation, use an HDMI cable with the HDMI Logo ( ). - To display an 1080p/60 Hz signal format, you need a High Speed HDMI cable. Conventional HDMI/DVI cable may not work properly. - HDMI cable transfers video and audio. Separate analog audio cables are not required. - See "Setting the HDMI audio mode" (- p. 45). To view the HDMI device video: Press + and B or b to select the HDMI 1, HDMI 2, HDMI 3 or HDMI 4. Note: To program the TV remote control to operate other devices, see p. 91. To connect a DVI device, you will need: •One HDMI-to-DVI adapter cable - For proper operation, the length of an HDMI-to-DVI adapter cable must not exceed 9.8 ft (3m). Recomended length: 6.6 ft (2m). •One 3.5mm Stereo to RCA Y-Cable - Analog audio for HDMI is only available on HDMI 3 and HDMI 4. Configuration is needed. See p. 31, 45. - An HDMI-to-DVI adapter cable transfers video only. Separate analog audio cables are required. Note: To ensure that the HDMI or DVI device is reset properly: • To turn on electronic components, turn on the TV first and then the HDMI or DVI device. • To turn off electronic components, turn off the HDMI or DVI device first and then the TV. [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106

17
Chapter 2: Connecting your TV
Connecting an HDMI
®
or DVI device to the HDMI input
HDMI
OUT
DVI/HDCP
OUT
AUDIO
R
L
OUT
TV back panel
HDMI device
DVI device
HDMI cable
Audio cable
HDMI-to-DVI adapter cable
The HDMI input on your TV receives digital audio and
uncompressed digital video from an HDMI source
device, or uncompressed digital video from a DVI
(Digital Visual Interface) source device.
This input is designed to accept HDCP (High-
Bandwidth Digital-Content Protection) program
material in digital form from EIA/CEA-861-D
compliant[1] consumer electronic devices (such as a set-
top box or DVD player with HDMI or DVI output).
Supported signal formats: VGA, SVGA, XGA, WXGA,
SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i
(60Hz), 1080p (24Hz/60Hz). For signal specifications,
see p. 86.
Supported Audio format: Linear PCM, sampling rate
32/44.1/48 kHz.
Note:
To connect a PC to the HDMI input, see p. 22.
Some legacy HDMI sources may not work properly with
your HDMI TV, due to the adoption of new standards. Try
the HDMI setting to Off (
-
p. 45).
To connect an HDMI device, you will need:
•one HDMI cable per HDMI device
Recommendation: For proper operation, use an
HDMI cable with the HDMI Logo (
).
To display an 1080p/60 Hz signal format, you need a
High Speed HDMI cable. Conventional HDMI/DVI
cable may not work properly.
HDMI cable transfers video and audio. Separate
analog audio cables are not required.
See “Setting the HDMI audio mode” (
-
p. 45).
To view the HDMI device video:
Press
+
and
B
or
b
to select the
HDMI 1
,
HDMI 2
,
HDMI 3
or
HDMI 4
.
Note:
To program the TV remote control to operate other
devices, see p. 91.
To connect a DVI device, you will need:
•One HDMI-to-DVI adapter cable
For proper operation, the length of an HDMI-to-DVI
adapter cable must not exceed 9.8 ft (3m).
Recomended length: 6.6 ft (2m).
•One 3.5mm Stereo to RCA Y-Cable
Analog audio for HDMI is only available on HDMI 3
and HDMI 4. Configuration is needed. See p. 31, 45.
An HDMI-to-DVI adapter cable transfers video only.
Separate analog audio cables are required.
Note:
To ensure that the HDMI or DVI device is reset
properly:
To turn on electronic components,
turn on the TV first
and then the HDMI or DVI device.
To turn off electronic components,
turn off the HDMI or
DVI device first
and then the TV.
[1] EIA/CEA-861-D compliance covers the transmission of
uncompressed digital video with high-bandwidth digital
content protection, which is being standardized for
reception of high-definition video signals. Because this is
an evolving technology, it is possible that some devices
may not operate properly with the TV.